• 509
• 1

What purpose does the Calibration Due field serve in the SmartLogs section of SmartLog Pro Manager Web Software?

• 1455
• 1

How do you connect the SmartLog Pro®2 to an Alvarado EDC turnstile?

• 877
• 0

How do you configure the proximity reader on the SmartLog Pro®2?

• 1733
• 1

Does the SmartLog Pro®2 have Wi-Fi capabilities?

• 1596
• 1

When do I need to recalibrate the SmartLog Pro® 2 and how can I do it?

• 1463
• 1

How many ESD tests can be stored on the SmartLog Pro® 2?

• 1252
• 1

Can the SmartLog Pro® 2 be connected to an external monitor?

• 1010
• 1

Is the SmartLog Pro Manager Web Software compatible with SmartLogs older than the SmartLog Pro® SE?

• 1344
• 1

When do I need to recalibrate the SmartLog Pro® SE and how can I do it?

• 1108
• 1

Why do I receive a “No Test” message when testing footwear?

• 1479
• 1

What can cause a SmartLog Pro® SE to not be located by the SLP Config program?

• 1179
• 1

How does the ID Expiration field in the operator screen work?

• 2256
• 2

Why does the SmartLog Pro® SE display “Check wrist cord connection”?

• 2120
• 4

What can I do if my SmartLog Pro® unit goes offline and back online in TEAM6?

• 1562
• 1

When testing footwear, why does it “timeout” even though I am on the footplate and pressing the switch?

• 1622
• 1

When testing footwear, why do I receive “Error 3” on the screen?

• 1922
• 0

What can you do if you are receiving test results for wrist straps at the SmartLog Pro® when you do not have a wrist strap plugged in?

• 2848
• 0

Can you change the gateway and subnet mask settings on the SmartLog Pro®?