EMIT - Support Center

advanced search

Support center

Knowledge base

Support links

Home

Tools

Tag: Cleaning

3 Articles

What cleaning solution may be used to clean the footplate on a SmartLog?

2473 views

99% Isopropyl alcohol is the best choice for cleaning because it leaves little to no residue....

Posted in: Hardware, SmartLog V5, SmartLog Pro, SmartLog Pro SE, SmartLog Pro 2

What can you do if the SmartLog Pro® shows NO TEST for footwear testing for all employees no matter what test limit settings are in use?

3904 views

Reboot the SmartLog Pro® by power cycling it. Check that the SmartLog Pro® is properly grounded and make sure the foot plate cable is connected properly on both ends. Check the version number of the footplate in tester’s Admin menu. If the field is blank or shows 000, then the foot...

Posted in: Hardware, SmartLog Pro

What can you do if you are receiving test results for wrist straps at the SmartLog Pro® when you do not have a wrist strap plugged in?

1387 views

We recommend that you clean the single wire jack with a burst of compressed air so the tester does not cumulate debris inside the jack. During repairs for this reported problem it was discovered that debris accumulated in between the sensors of the single wire jack may cause the tester to falsely...

Posted in: Hardware, SmartLog Pro

Page: 1 of 1