Support Center > Knowledge base> Tagged: SmartLog Pro 2
Tag: SmartLog Pro 2
6 Articles
Orange arrow Is the SmartLog Pro Manager Web Software compatible with SmartLogs older than the SmartLog Pro® SE?

342 views
  SmartLog Pro® Manager is only compatible with the SmartLog Pro® SE and SmartLog Pro® 2 models. SmartLog Pro® models may be converted into SmartLog Pro® SE models with the purchase of a new SD card that has the correct programming. Please contact the EMIT Factory for more details....
Orange arrow Can the SmartLog Pro® 2 be connected to an external monitor?

289 views
  Yes. It has a VGA Port that outputs a mirrored image of the tester’s display to an external monitor. The native video resolution is 800 x 480....
Orange arrow How many ESD tests can be stored on the SmartLog Pro® 2?

440 views
  The SmartLog Pro®2 will store thousands of transactions before exceeding its memory. The SmartLog Pro® 2 is intended to be used with the SmartLog Pro Manager Web Software which continuously receives all transactions made at the tester, thus freeing up any memory being used. Internal flash memory al...
Orange arrow When do I need to recalibrate the SmartLog Pro® 2 and how can I do it?

457 views
  Frequency of re-calibration should be based on the critical nature of those ESD sensitive items handled and the risk of failure for the ESD protective equipment and materials. In general, EMIT recommends that calibration be performed annually. Use the EMIT 50424 Limit Comparator and EMIT 50784 5...
Orange arrow Does the SmartLog Pro®2 have Wi-Fi capabilities?

498 views
  Yes. Use the Wi-Fi setup to wirelessly connect the SmartLog Pro® 2 to the network in instances where a direct Ethernet cable is not used....
Orange arrow How do you connect the SmartLog Pro®2 to an Alvarado EDC turnstile?

171 views
  You may use the procedure in the video linked below: https://youtu.be/jUueTy9N29s https://youtu.be/jUueTy9N29sThis process is also covered in the TB-6611 - Turnstile for SmartLog Pro® Installation, Operation, and Maintenance guide at the link below: https://www.descoindustries.com/PDF/TB-6...

Page: 1 of 1