Why doesn’t the SmartLog V5 power up?
Article ID: 79700

Question

Why doesn’t the SmartLog V5 power up?

Answer

1. Verify the incoming voltage meets the power requirements referenced on the power supply as well as SmartLog V5 serial label.
2. Verify the blade of the power supply is completely fastened to the transformer.
3. Verify the plug of the power supply is completely fastened to the jack of the SmartLog V5.
4. Verify the RJ11 footplate cable isn’t plugged into the RS-232 jack of the SmartLog V5.

related articles

Will the SmartLog V5 log test results without the TEAM5 software?
How often does the TEAM5 software collect ESD transactions from each SmartLog?
What should the Poll Frequency be set to when using a SmartLog Pro® in TEAM5?
How many ESD tests can be stored on the SmartLog Pro®?
Can the ESD transactions stored on the SmartLog Pro® be extracted without the use of the TEAM5 software?
What are the USB Ports on the SmartLog Pro® for?
Do the humidity and temperature sensors need to be calibrated?
Can the footplate from previous SmartLog versions be used with the new SmartLog Pro®?
Why does the SmartLog Pro® not initiate the ESD test after placing my finger on the test switch?
What are the test limits of the wrist straps and footwear on the SmartLog Pro®?

Article Details

Views: 3376	Created on: Oct 12, 2016 Date updated: Oct 12, 2016
Posted in: Hardware, SmartLog V5 Tagged: SmartLog V5, Power

Poor 12345 Outstanding