|
|
|
|
Where can I download the SmartLog Pro Manager Web Software?
|
|
| |
The software may be downloaded here: http://desco.descoindustries.com/downloads/slp/configsetup.msi...
|
|
|
Is TEAM5 limited to a specific number of SmartLogs? |
|
| |
If you are using the direct IP method of communication, there is no limit. If you are using the virtual com port communication method with the SmartLog V5, you will be limited to connecting 64 devices. Please contact Desco for additional information....
|
|
|
Can multiple supervisors have access to the TEAM5 Enterprise software at one time?
|
|
| |
Yes. Within the TEAM5 Enterprise software there is a feature called “Remote Admin”. This feature is located in Admin > Network Admin > Network Apps > Remote Administrators. This feature is a remote application that will reside on the supervisor’s desktop and allows access...
|
|
|
How do you enable viewing analog data (resistance, temperature and humidity) in TEAM5? |
|
| |
First you will need the to update the client software that runs on the SmartLog Pro to at least version 4.05.01. Please contact the EMIT factory for a link to download the latest version. Next you will need to follow the procedure below for enabling the feature in the TEAM5 software: - Go to the ...
|
|
|
How can you accommodate visitors that need access to an area where a SmartLog is restricting access?
|
|
| |
What most customers do is add several visitor profiles into the TEAM5 User Edit window. Creating a visitor profile allows you to assign cards to them. So, when a visitor comes they can use a visitor card provided to them by the front desk. When you set up the visitor profile you decide what test r...
|
|
|
Is the SmartLog Pro® compatible with SmartLog X3 and SmartLog V4 units? |
|
| |
No. When you purchase a SmartLog Pro® you will need to update the TEAM5 software. The update allows the TEAM5 software to communicate with the SmartLog Pro. At the same time this update will affect the performance of the SmartLog X3 and SmartLog V4. If you wish to add a SmartLog Pro® to you...
|
|
|
How do you enable the relay on the SmartLog Pro®?
|
|
| |
The relay terminal is located on the back of the SmartLog Pro®. Instructions for configuring it are described on page 8 of the SmartLog Pro® manual TB-6594, which is available for download here:http://documents.descoemit.com/pdf/TB-6594.pdf To enable the relay time in the TEAM5 software, t...
|
|
|
How many ESD tests can be stored on the SmartLog Pro®? |
|
| |
The SmartLog Pro® records all ESD transactions to its 8Gig SD Card. The SD Card will store tens of thousands of transactions before exceeding its memory. The SmartLog Pro® is intended to be used with the TEAM5 ESD Software which continuously polls all stored transactions freeing up any memo...
|
|
|
Is TEAM5 compatible with both the SmartLog Pro® and SmartLog V5?
|
|
| |
Yes....
|
|
|
Can the ESD transactions stored on the SmartLog Pro® be viewed without the use of the TEAM5 software? |
|
| |
No....
|
|
|
How often does the TEAM5 software collect ESD transactions from each SmartLog?
|
|
| |
TEAM5 continuously polls the ESD transactions off each SmartLog device it is communicating with. For the SmartLog V5, it is estimated that the polling cycle for 1 is approximately 5 seconds. Each SmartLog V5 added to the software will add an additional 5 seconds. For the SmartLog Pro®, it is e...
|
|
|
How do you update the SmartLog Pro® using TEAM6? |
|
| |
Please watch a short video with instructions on this subject in the TEAM6 Software Videos section of our website: https://emit.descoindustries.com/Resources.aspx...
|
|
|
What can I do if my SmartLog Pro® unit goes offline and back online in TEAM6?
|
|
| |
Please make sure that you have POLLING turned ON when you are in the TEAM6 System Monitor screen to see the latest status. If a SmartLog Pro® does not respond in the preset time limit, the unit is reported as “offline”. This does not necessarily mean there is a problem with the Sma...
|
|
|
How do you update the TEAM6 software? |
|
| |
Please watch a short video with instructions on this subject in the TEAM6 Software Videos section of our website: https://emit.descoindustries.com/Resources.aspx...
|
|
|
Where can I get a license for the SmartLog Pro Manager Web Software?
|
|
| |
The software requires valid license to operate. Upon installation, the software will run with a trial license and the expiration date is shown on the sidebar: To activate the software click on Activate (see the image above): This form contains a unique Product ID. Send this ID to your Desco r...
|